A combination of accumulative roll bonding (ARB) and rolling is used to fabricate nanolamellar
Cu–Nb multilayers with individual layer thicknesses (h) of 600μm⩾h⩾10nm with a total …

The critical current density (J c ) of hot isostatic pressed (HIPed) MgB 2 wires, measured by
dc transport and magnetization, is compared with that of similar wires annealed at ambient …

… software installed, you can download article citation data to the citation manager of your
choice. Simply select your manager software from the list below and click Download. …

We report dc transport and magnetization measurements of the critical current density, J c ,
and microstructural analyses of MgB 2 wires fabricated by the powder-in-tube method (PIT) …

We present the fabrication and test results of hot-isostatic-pressed (HIPed) powder-in-tube (PIT)
MgB 2 coils. The coils' properties were measured by transport and magnetization at …

We present a detailed analysis of the effect of heat treatments on the microstructure, magnetization,
and transport properties of MgB 2 wires produced by the powder-in-tube method. We …

Self-organized coherence between fiber lasers has been reported both via all-fiber 2x2
directional coupler trees and in spatially multi-core fibers. We have taken this a major step …

Adult activity of native green June beetles, Cotinis nitida L., and invasive Japanese beetles,
Popillia japonica Newman, peaked in late July in Kentucky coincident with later stages of …

The microstructures of MgB 2 wires prepared by the powder-in-tube technique and subsequent
hot isostatic pressing were investigated using transmission electron microscopy. A large …

Nanolayered composites have garnered much attention due to their ability to withstand
deformation to large strains, shock deformation, and irradiation induced microstructural damage. …