One of the most attractive features of diamond is its robust p-type surface conductivity that
develops under atmospheric conditions on hydrogen-terminated samples. The as-grown CVD …

… This may partly explain the observed better agreement between HH and HF techniques in
… between HF and HH techniques are more pronounced than differences between HF and FF …

Using a sample of e + e − annihilation events collected with the L3 detector at the Z
resonance corresponding to an integrated luminosity of 137 pb −1 , we have searched for …

Decoupling MIM capacitors are typically implemented to reduce power supply noise. In this
work we reported characterization of Atomic Layer Deposited (ALD) Ta 2 O 5 and Hf-doped …

… In this work, the `complex' layers were formed in HF-ethanol electrolyte (26% HF–33% ethanol)
and containing four parts: (A) ACD—100 mA/cm 2 , t anod —10 min; (B) ACD—80 mA/cm …

… injection hf is of interest when discussing the total film cooling performance. The parameter
hf … Here, the heat transfer coefficient with film injection hf is normalized with the value without …

… Nondimensional local heat transfer coefficient hf/h0 at a blowing rate of M=0.5 and 1.0 …
Nondimensional local heat transfer coefficient hf/h0 at a blowing rate of M=0.5 and 1.0 …

… A cardioverter-defibrillator or a resynchronization system was implanted in two thirds of our
patients (comparable to TIM-HF study [7]) with a considerable prognostic impact on primary …

… Enhancement of the HF/ethanol ratio allows to obtain the layers with smaller porosity, and
consequently, renders them both mechanically more stable and more resistive to support the …

This work contributes to the development of a minimally invasive combined perfusion and
oxygen sensor devoted to measurements in tissues. A novel design is reported for the oxygen …